Mining Turkey 2016 Fair

24 to 27 November 2016 in İstanbul Tüyap Fair and Congress Center 7. Mineral Turkey We attended the fair. Our stand at Hall 3 was high. The visitors from Germany, Feluwa, and Düchting from Germany, Egger from Switzerland, attracted great interest from the visitors. Samples of Siccast Coatings made within the framework of Seterm Service [...]

By | 2019-04-17T07:29:55+00:00 August 26th, 2017|NEWS|0 Comments

Mining Turkey 2014 Fair

27-30 Kasım tarihleri arasında Istanbul Tüyap Fuar ve Kongre Merkezi'nde yapılmış olan 6. uluslararası madencilik, maden makine ve ekipmanları, iş makineleri fuarında yer aldık. Maden Türkiye Fuarı ile ürünlerimizi müşterilerimize daha yakından tanıtma fırsatı yakaladık Katılımcı Firmalar Duechting Pumpen GmbH Emile Egger CA Feluwa Pumpen GmbH

By | 2017-08-26T10:15:59+00:00 August 26th, 2017|NEWS|0 Comments

Energy Efficient Magnetic Pump

Pumps with non-metallic insulation casings are used to increase energy efficiency. They can also be used in high pressure and flow operating conditions. In the chemical and petrochemical industry, the use of magnetic clutch pumps is increasing day by day. Due to the use of non-metallic insulation sleeves instead of standard metallic insulation sleeves, the [...]

By | 2019-04-17T08:03:04+00:00 August 26th, 2017|TECHNICAL INFORMATION|0 Comments

Vortex Fan Pump for 3 Phase Transfer

Egger's Vortex Flanged Mud (TURO®) pumps have been designed with a new design fan. TEO fans, the latest product designed by Egger. This new design has the ability to work with air, such as the EO / EOS series with semi-open fans, and with very high solids such as the TURO® series. The TEO fan [...]

By | 2019-04-17T08:02:13+00:00 August 26th, 2017|TECHNICAL INFORMATION|0 Comments

TURO Series Vortex Fan Pump

Heavy-duty Turo® vortex fans with HN series - first series This design was originally made of NiHard material. The fan was designed to be in front of the heavy duty rear wear plate. In the early part of the 1960s, Egger realized that there was an irregular flow pattern in the flow resulting from the [...]

By | 2019-04-17T08:04:18+00:00 August 26th, 2017|TECHNICAL INFORMATION|0 Comments

Extruder Pump

GEAR PUMP USAGE IN POLYMER EXTRUSION Gear pumps have been successfully used in the extrusion industry for many years. Gear pumps are a kind of positive displacement pumps, which provide stable flow by eliminating the oscillation in the flow. Depending on the operating conditions and the characteristics of the polymer, the fluctuation below 0.5% can [...]

By | 2019-04-17T08:05:23+00:00 August 26th, 2017|TECHNICAL INFORMATION|0 Comments